
NeveRest Classic Motor ONLY (am-3104)
Product Overview:
This is ONLY the motor that is featured in the NeveRest Classic Series gearmotors. This motor has a helical pinion gear pre-installed that interfaces with all our NeveRest Classic gearboxes. Unless you have a virtually no load situation, like driving a prop, this motor will not help without one of the following gearboxes.
Compatible With:
NeveRest Classic 20 (am-3102)
NeveRest Classic 40 (am-2964a)
NeveRest Classic 60 (am-3103)
This is not compatible with the NeveRest Orbital series of gearmotors; the pinion and faceplate are incompatible.
Encoder Cable options:
Encoder cables arenot included with this motor, and are sold separately. We have two options:
The hall effect encoder mounted on the back of this motor provides 28 pulses per revolution (ppr).
Use in a BaneBots Gearbox:
This motor can be attached to a BaneBots P60 gearbox. See the downloads tab of this page for the step by step assembly video.
Specifications:
Physical Specs:
This is ONLY the motor that is featured in the NeveRest Classic Series gearmotors. This motor has a helical pinion gear pre-installed that interfaces with all our NeveRest Classic gearboxes. Unless you have a virtually no load situation, like driving a prop, this motor will not help without one of the following gearboxes.
Compatible With:
NeveRest Classic 20 (am-3102)
NeveRest Classic 40 (am-2964a)
NeveRest Classic 60 (am-3103)
This is not compatible with the NeveRest Orbital series of gearmotors; the pinion and faceplate are incompatible.
Encoder Cable options:
Encoder cables are
- am-2992 is a cable which has the white 4-pin connector for the encoder and also the black 4-pin connector for the HiTechnic motor controller.
- am-2993 is a cable which has the white 4-pin connector for the encoder on one end and 4 separate black connectors.
The hall effect encoder mounted on the back of this motor provides 28 pulses per revolution (ppr).
Use in a BaneBots Gearbox:
This motor can be attached to a BaneBots P60 gearbox. See the downloads tab of this page for the step by step assembly video.
Specifications:
Physical Specs:
- Overall Length: 75mm (2.95 in)
- Maximum Diameter: 38mm (1.49 in)
- Weight: 0.550 Pounds
- Mounting Holes: 3x M2-0.4 x 22mm deep
- Electrical Connection Geometry: 6-pin connector for motor power and encoder contact
- Gear Material: Steel
- Body Material: Steel with plastic encoder housing
- Wire Gauge: 18 AWG
- Voltage: 12 volt DC
- No Load Free Speed: 6600 RPM
- Power: 14W
- Stall Torque: 8.75 oz-in
- Stall Current: 11.5 A
- Output pulse per revolution of Output Shaft (ppr): 28